KT Superior LED Side Marker Lamps

ABOUT THE NEW L.E.D TECHNOLOGY


KT Truck and Trailer Lamps – SUPERIOR Patented L.E.D Technology.

IMG_0526
Model No. KT57103M | Side Marker Lamp – Red/Amber


The KT Trailer Lamp range was developed with the specific goal in mind of producing the very best performing trailer lamp available in the global market. It was determined that to do this, the output of the light had to be superior to any lamp currently available.

It was noted by the KT team that interior lighting for homes and buildings is very bright, smooth and soft. Yet for vehicle
lighting, the light output is always oddly shaped, streaked with patterns and essentially not as effective as it could be.
This is generally because trailer lighting requires specific size housings which limits design techniques and the passing of ECE and ADR, further restricting what can be achieved.

Working within this framework, the strategy became about re-creating the light source itself, not the housing or the lens. The KT team then set about designing an all new Light emitting Diode, that, although all looking the same, can be changed internally to create different angles of light. This allowed us to step away from the use of lens optics and reflectors to direct the light.

The results in light output can be seen below, with the KT lamps delivering the most incredibly even light output. The performance gains of this technology ensures that the lamps pass ECE and ADR with ease, they are more noticeable from all angles on the road, making them safer. Another safety benefit is the use of clear lenses and housings, as the transition from clear to red or amber is so dramatic, the attention these lamps demand from road users is far greater than that of traditional lamps, further increasing road safety.

Conventional Trailer Lamp in comparison to the KT Superior L.E.D Trailer Lamp
Conventional Trailer Lamp in comparison to the KT Superior L.E.D Trailer Lamp (Click to Enlarge Image)

2

  • ADR & ECE Approved
  • World Wide Patent Pending
  • Fully Submersible
  • Clearest Light on the Market
  • Widespread Seamless Light
  • Advanced L.E.D Technology uses the L.E.D to project light at an angle that meets ADR rather than the conventional Trailer Light which rely’s on the patterns in the outer casing
  • Virtually Indestructible Clear Poly-carbonate Lens


THE KT SUPERIOR L.E.D SIDE MARKER LAMP RANGE

Model No. KT57100M
Rear End Outline Marker Lamp – Red

Model No. KT57100M Rear End Outline Marker Lamp - Red
Model No. KT57100M | Rear End Outline Marker Lamp – Red
  • 12-32V
  • ADR & ECE Approved (49/00)
  • Waterproof and fully submersible
  •  Virtually indestructible poly-carbonate lens
  • Pre-wired with 150mm of 2 core cable
  • Stainless steel nuts and bolts included
  • Packed in a retail blister pack

Model No. KT57101M
Front End Outline Marker Lamp – Amber

Model No. KT57101M | Front End Outline Marker Lamp - Amber
Model No. KT57101M | Front End Outline Marker Lamp – Amber
  • 12-32V
  • ADR & ECE Approved (49/00)
  • Waterproof and fully submersible
  •  Virtually indestructible poly-carbonate lens
  • Pre-wired with 150mm of 2 core cable
  • Stainless steel nuts and bolts included
  • Packed in a retail blister pack

Model No. KT57102M
Front End Outline Marker Lamp – White

Model No. KT57102M | Front End Outline Marker Lamp - White
Model No. KT57102M | Front End Outline Marker Lamp – White
  • 12-32V
  • ADR & ECE Approved (49/00)
  • Waterproof and fully submersible
  •  Virtually indestructible poly-carbonate lens
  • Pre-wired with 150mm of 2 core cable
  • Stainless steel nuts and bolts included
  • Packed in a retail blister pack

Model No. KT57103M
Side Marker Lamp – Amber/Red

Model No. KT57103M | Side Marker Lamp - Red/Amber
Model No. KT57103M | Side Marker Lamp – Red/Amber
  • 12-32V
  • ADR & ECE Approved (45/00)
  • Waterproof and fully submersible
  •  Virtually indestructible poly-carbonate lens
  • Pre-wired with 150mm of 2 core cable
  • Stainless steel nuts and bolts included
  • Packed in a retail blister pack

DOWNLOAD OUR TRUCK AND TRAILER LIGHT CATALOGUE HERE:

cover
KT Superior L.E.D Truck and Trailer Light Catalogue

 


THE KT CLICK N TOW TRAILER LIGHT HARNESS SYSTEM

The KT Click N Tow Trailer Light Wiring Harness System is a simple colour coded wiring system which is waterproof, universal and compatible with all brands of trailer lamps. The System is designed for a simple, easy Trailer Light Wiring Harness Installation. Simply Click ‘N’ Tow.The system is designed using 21 Part Numbers. Each Part Number’s packaging contains a Colour Code. This colour coding system is used in conjunction with the ‘KT Click ‘N’Tow Trailer Light Wiring Harness System Guide’. These guides are supplied inside each product packaging and is also provided on merchandiser signage.

The Guide assists in identifying the parts required, and also supports you with the installation of your Wiring Harness. To read more about the Click N Tow Trailer Light Wiring Harness System, Visit our Click N Tow Blog Post Here



VIEW OUR FULL RANGE OF KT SUPERIOR L.E.D TRUCK & TRAILER LAMPS AVAILABLE:

(Click to View Product)
TL2
(Click to View Product Range)
TL3
(Click to View Product Range)
TL7
(Click to View Product Range)
TL5
(Click to View Product Range)
TL6
(Click to View Product Range)
TL9
(Click to View Product Range)

 

 

 

TL8
(Click to View Product Range)

Untitled-10


 

 

Untitled-10


The KT Click N Tow Trailer Light Wiring Harness System for Box Trailers & Marine Trailers

Have you ever wanted to wire up your Trailer Lights without a hassle? Well KT has a solution for you!

KT has developed the Click ‘N’Tow Trailer Light Wiring Harness System for Box Trailers and Marine Trailers.

IMG_0571
Click N Tow System Installed on Box Trailer

The KT Click N Tow Trailer Light Wiring Harness System is a simple colour coded wiring system which is waterproof, universal and compatible with all brands of trailer lamps. The System is designed for a simple, easy Trailer Light Wiring Harness Installation. Simply Click ‘N’ Tow.

This system is designed using 21 Part Numbers. Each Part Number’s packaging contains a Colour Code. This colour coding system is used in conjunction with the ‘KT Click ‘N’Tow Trailer Light Wiring Harness System Guide’. These guides are supplied inside each product packaging and is also provided on merchandiser signage.

The Guide assists in identifying the parts required, and also supports you with the installation of your Wiring Harness.

Marine Trailer
Click N Tow System Installed on Marine Trailer

Marine Trailers and Box Trailers use a separate Click ‘N’Tow Trailer Light Wiring Harness System.  Some part numbers however, can be used for both Marine and Box Trailers.These include the Universal Adaptors for Trailer Lamps (RED/2) and Side Marker Lamps (MAGENTA/4) and a T-Piece fitting (WHITE/6).

KT Click ‘N’ Tow Trailer Light Wiring Harness System for MARINE TRAILERS:

A variety of length looms are available for your Marine Trailer Wiring System to compensate for a variety of sized Trailers. Below is the complete wiring guide for identification of parts and installation for Marine Trailers. The wiring guide is included inside each product packaging.

3_Trailer_Accessories_Category 19

KT Click ‘N’ Tow Trailer Light Wiring Harness System for BOX TRAILERS:

A variety of length looms are available for your Box Trailer Wiring System to compensate for a variety of sized Trailers. Below is the complete wiring guide for identification of parts and installation for Box Trailers. The wiring guide is included inside each product packaging.

3_Trailer_Accessories_Category 18

Question: How do I know that this system will suit my Trailer?

The KT Click N Tow Trailer Light Wiring Harness System will suit most Standard Box Trailers and Marine Trailer sizes, however if you do have any queries, see below Trailer Sizing Guide. You can also contact one of our friendly sales team on 1300 559 953 who will be able to recommend the correct size wiring harness for you.

This guide is a quick and easy way to identify which Main Loom Harness Length you will require for your Trailer.

Question: Why should I only install the Main Loom (ORANGE/8) down the right side of my Trailer?

The Box Trailer Main Loom (ORANGE/8) is designed to be installed down the right side of the Trailer since it is designed to only operate the right indicator. To operate the second (Left) Trailer Lamp, the (PURPLE/7) Connection from Main Loom to the Second (Left) Trailer Lamp with 2 Pin Aux must be installed. Failure to install the (ORANGE/8) Main Loom on the right side of the Trailer will result in the left indicator to function as the right indicator and the right indicator to function as the left indicator.

_________________________________________________________________

Question: How easy is the KT Click ‘N’ Tow Trailer Light Wiring Harness System to install?

The Click ‘N’ Tow Wiring System is designed for a DIY installation, therefore a lot of thought has been put into creating this system. The Colour Coded Guides make the installation very simple in choosing the required products. By matching the Colour Code on your product packaging with the below diagrams, you will very quickly identify which part of the Loom you are working with.

KT has also created video demonstrations for Both Marine Trailer and Box Trailer Installations for further support. Simply by following the steps in these videos, you will find your The Click ‘N’ Tow Wiring System, very simple and effective.

See complete below video demonstrations for both Marine and Box Trailers.

_________________________________________________________________

 KT Click ‘N’ Tow Trailer Light Wiring Harness System For Box Trailers Video Installation Demonstration:

_________________________________________________________________

For more information on this product range, please do not hesitate to contact our friendly team on 1300 559 953 or email sales@ktcables.com.au

You may also like to visit our website: www.ktcables.com.au and our Facebook Page www.facebook.com/ktcables