Trailer Light Wiring Harness for Box Trailers – Click ‘N’ Tow

 

Have you ever wanted to wire up your Trailer Lights without a hassle? KT’s Click N Tow Trailer Light Wiring Harness is the solution for you!

The KT Click N Tow Trailer Light Wiring Harness System is a simple colour coded wiring system which is waterproof, universal and compatible with all brands of trailer lamps.
The System is designed for a simple, easy Trailer Light Wiring Harness Installation with minimal use of tools. The system is ideal for DYI at home installations.

The Click ‘N’Tow Trailer Light Wiring Harness System for Box Trailers is available in 3 kits, each of which contain all looms and connections required to install side marker lamps, rear trailer lamps, trailer plug and licence plate lamps on 6×4 & 7×4 Box Trailers.

 

 

Kits Available to suit 6×4 & 7×4 Box Trailers:

Model No. KT58010 – 6×4 & 7×4 Box Trailer Wiring Harness with 7 Pin Small Round Trailer Plug

Model No. KT58011 – 6×4 & 7×4 Box Trailer Wiring Harness with 7 Pin Flat Trailer Plug

Model No. KT58012 – 6×4 & 7×4 Box Trailer Wiring Harness with 7 Pin Large Round Trailer Plug

 

 

 

 

 

 

 

 

 

 

Each pack contains all parts required to install a complete Click N Tow Trailer Light Wiring Harness on a 6×4 & 7×4 Box Trailer.

All cables are manufactured using marine tinned copper to provide durability and weather resistance. Each connection contains a waterproof gel which assists in protecting pins from dirt, dust and water.

NOTE: each of these packs do not include side markers, licence plate lamp, or trailer lamps, however the Click N Tow wiring harness is completely universal and compatible with any side marker, licence plate lamp and trailer lamp.

IMPORTANT: During installation, always ensure to install the main loom (Orange/8) down the right side of your trailer. Failure to do so will result in the left indicator to function as the right indicator and right indicator to function as the left indicator.

INSTALLING YOUR HARNESS: Installing your wiring harness is as simple as matching the product colour codes with the corresponding trailer diagram on the back of the packaging.

 

FREQUENTLY ASKED QUESTIONS ABOUT CLICK N TOW:

Question: How do I know that this system will suit my Trailer?

The KT Click N Tow Trailer Light Wiring Harness System will suit 6×4 & 7×4 Box trailers. If you are unsure, you can also contact one of our friendly sales team on 1300 559 953 who will be able to recommend the correct size wiring harness for you.

Question: Why should I only install the Main Loom (ORANGE/8) down the right side of my Trailer?

The Box Trailer Main Loom (ORANGE/8) is designed to be installed down the right side of the Trailer since it is designed to only operate the right indicator. To operate the second (Left) Trailer Lamp, the (PURPLE/7) Connection from Main Loom to the Second (Left) Trailer Lamp with 2 Pin Aux must be installed.
Failure to install the (ORANGE/8) Main Loom on the right side of the Trailer will result in the left indicator to function as the right indicator and the right indicator to function as the left indicator.

Question: How easy is the KT Click ‘N’ Tow Trailer Light Wiring Harness System to install?

The Click ‘N’ Tow Wiring System is designed for a DIY installation, therefore a lot of thought has been put into creating this system. The Colour Coded Guides make the installation very simple to connect the harness to the correct pieces
By matching the Colour Code on your product packaging with the below diagrams, you will very quickly identify which part of the Loom you are working with.

KT has also created video demonstrations for Both Marine Trailer and Box Trailer Installations for further support. Simply by following the steps in these videos, you will find your The Click ‘N’ Tow Wiring System, very simple and effective.

 

 

 KT Click ‘N’ Tow Trailer Light Wiring Harness System For Box Trailers Video Installation Demonstration:

For more information on this product range, please do not hesitate to contact our friendly team on 1300 559 953 or email sales@ktcables.com.au

You may also like to visit our website: www.ktcables.com.au and our Facebook Page www.facebook.com/ktcables

Superior Automotive Globes Merchandiser

The KT Superior Automotive Globes Merchandiser features a full range of Halogen (Headlight), Wedge (Exterior) and Festoon (Interior) Globes, along with a Comprehensive Globes Catalogue and Fitment Guide.

The Fitment Guide provides an easy, efficient way of finding the right globe for any vehicle.

This merchandiser is 670mmW x 1070mmH x 80mmD.

The Superior Automotive Globe Merchandiser Includes:

(Click to Enlarge Table)

Merchandiser Includes:

45 x 150mm Chrome hooks
45 x Flip-tags
3 x (670 x 55mm) PVC header signs
207 Blister packs total
Comprehensive globe catalogue & fitment guide

Land Transport Fits KT Signature Series L.E.D Truck & Trailer Lamps

Land Transport – Increasing their brand exposure to 1000’s of road users daily

• ADR & ECE Compliant

• Patent Pending

• Fully Submersible

• Marketing within the light provides increased Brand Exposure to thousands of road users everyday. The only marketing that road users are forced to look at as brake and indicator lights are engaged.

• Clearest Light on the Market. Uses advanced, Innovative LED Technology never seen before to provide widespread seamless light.

• Advanced L.E.D Technology uses the L.E.D to project light at an angle that meets ADR standards rather than the conventional Trailer Light which relies on the patterns in the outer casing.

• Virtually Indestructible Clear Polycarbonate Lens.

Land Transport  Fits KT Signature Series L.E.D Truck & Trailer Lamps

 

Land Transport Fits KT Signature Series L.E.D Truck & Trailer Lamps

KT SIGNATURE TRUCK & TRAILER LAMPS FEATURE SUPERIOR L.E.D TECHNOLOGY

The KT Trailer Lamp range was developed with the specific goal in mind of producing the very best performing trailer lamp available in the global market. It was determined that to do this, the output of the light had to be superior to any lamp currently available.

It was noted by the KT team that interior lighting for homes and buildings is very bright, smooth and soft. Yet for vehicle lighting, the light output is always oddly shaped, streaked with patterns and essentially not as effective as it could be.
This is generally because trailer lighting requires specific size housings which limits design techniques and the passing of ECE and ADR, further restricting what can be achieved.

Working within this framework, the strategy became about re-creating the light source itself, not the housing or the lens. The KT team then set about designing an all new Light emitting Diode, that, although all looking the same, can be changed internally to create different angles of light. This allowed us to step away from the use of lens optics and reflectors to direct the light.

The results in light output can be seen below, with the KT lamps delivering the most incredibly even light output.

The performance gains of this technology ensures that the lamps pass ECE and ADR with ease, they are more noticeable from all angles on the road, making them safer.

Another safety benefit is the use of clear lenses and housings, as the transition from clear to red or amber is so dramatic, the attention these lamps demand from road users is far greater than that of traditional lamps, further increasing road safety.

Comparison photos between Conventional L.E.D Technology & New KT Superior L.E.D Technology.

---

VIEW OUR RANGE OF LIGHTS AVAILABLE BY DOWNLOADING OUR CATALOGUE:
For any inquiries, contact us on 1300 559 953 or email sales@ktcables.com.au

 

Traymark Industrial Caravans take on the KT ‘Signature Series’ Lights

S

Traymark Industrial Caravans fit The KT Signature Series to their Trailers.

• ADR & ECE Compliant

• Patent Pending

• Fully Submersible

• Marketing within the light provides increased Brand Exposure to thousands of road users everyday. The only marketing that road users are forced to look at as brake and indicator lights are engaged.

• Clearest Light on the Market. Uses advanced, Innovative LED Technology never seen before to provide widespread seamless light.

• Advanced L.E.D Technology uses the L.E.D to project light at an angle that meets ADR standards rather than the conventional Trailer Light which relies on the patterns in the outer casing.

• Virtually Indestructible Clear Polycarbonate Lens.

Traymark Industrial Caravans using the KT Signature Series Marker Lamps

 

Traymark Industrial Caravans using the KT Signature Series Marker Lamps

KT SIGNATURE TRUCK & TRAILER LAMPS FEATURE SUPERIOR L.E.D TECHNOLOGY

The KT Trailer Lamp range was developed with the specific goal in mind of producing the very best performing trailer lamp available in the global market. It was determined that to do this, the output of the light had to be superior to any lamp currently available.

It was noted by the KT team that interior lighting for homes and buildings is very bright, smooth and soft. Yet for vehicle lighting, the light output is always oddly shaped, streaked with patterns and essentially not as effective as it could be.
This is generally because trailer lighting requires specific size housings which limits design techniques and the passing of ECE and ADR, further restricting what can be achieved.

Working within this framework, the strategy became about re-creating the light source itself, not the housing or the lens. The KT team then set about designing an all new Light emitting Diode, that, although all looking the same, can be changed internally to create different angles of light. This allowed us to step away from the use of lens optics and reflectors to direct the light.

The results in light output can be seen below, with the KT lamps delivering the most incredibly even light output.

The performance gains of this technology ensures that the lamps pass ECE and ADR with ease, they are more noticeable from all angles on the road, making them safer.

Another safety benefit is the use of clear lenses and housings, as the transition from clear to red or amber is so dramatic, the attention these lamps demand from road users is far greater than that of traditional lamps, further increasing road safety.

Comparison photos between Conventional L.E.D Technology & New KT Superior L.E.D Technology.

---

VIEW OUR RANGE OF LIGHTS AVAILABLE BY DOWNLOADING OUR CATALOGUE:
For any inquiries, contact us on 1300 559 953 or email sales@ktcables.com.au

 

New ‘Dreamland Trailers’ Signature Series Mine Bar/Combination Lights

S

New Signature Lamps for Dreamland Trailers are now fitted and looking great! (This is while lights are not engaged)

• ADR & ECE Compliant

• Patent Pending

• Fully Submersible

• Marketing within the light provides increased Brand Exposure to thousands of road users everyday. The only marketing that road users are forced to look at as brake and indicator lights are engaged.

• Clearest Light on the Market. Uses advanced, Innovative LED Technology never seen before to provide widespread seamless light.

• Advanced L.E.D Technology uses the L.E.D to project light at an angle that meets ADR standards rather than the conventional Trailer Light which relies on the patterns in the outer casing.

• Virtually Indestructible Clear Polycarbonate Lens.

Dreamland Trailers Signature Series Mine Bar / Combination Lamps with Brake and Indicator engaged. The clearest Lights on the market.

 

Dreamland Trailers Mine Bar / Combination Lights with Brake and Indicator engaged. This light is the clearest on the market.

KT SIGNATURE TRUCK & TRAILER LAMPS FEATURE SUPERIOR L.E.D TECHNOLOGY

The KT Trailer Lamp range was developed with the specific goal in mind of producing the very best performing trailer lamp available in the global market. It was determined that to do this, the output of the light had to be superior to any lamp currently available.

It was noted by the KT team that interior lighting for homes and buildings is very bright, smooth and soft. Yet for vehicle lighting, the light output is always oddly shaped, streaked with patterns and essentially not as effective as it could be.
This is generally because trailer lighting requires specific size housings which limits design techniques and the passing of ECE and ADR, further restricting what can be achieved.

Working within this framework, the strategy became about re-creating the light source itself, not the housing or the lens. The KT team then set about designing an all new Light emitting Diode, that, although all looking the same, can be changed internally to create different angles of light. This allowed us to step away from the use of lens optics and reflectors to direct the light.

The results in light output can be seen below, with the KT lamps delivering the most incredibly even light output.

The performance gains of this technology ensures that the lamps pass ECE and ADR with ease, they are more noticeable from all angles on the road, making them safer.

Another safety benefit is the use of clear lenses and housings, as the transition from clear to red or amber is so dramatic, the attention these lamps demand from road users is far greater than that of traditional lamps, further increasing road safety.

Dreamland Trailers ‘Amber/Red’ Side Marker Lamp

Dreamland Trailers White Marker Lamp

Comparison photos between Conventional L.E.D Technology & New KT Superior L.E.D Technology.

---

VIEW OUR RANGE OF LIGHTS AVAILABLE BY DOWNLOADING OUR CATALOGUE:
For any inquiries, contact us on 1300 559 953 or email sales@ktcables.com.au

 

NEW KT Signature L.E.D Truck Lamps fitted to NOLAN’S Transport Trucks

KT Signature Lamps fitted to Nolan’s Interstate Transport Trucks. Model used: KT57332M Stop, Tail & Indicator Triple Truck Lamp. (Click to view full range of lights available)

• ADR & ECE Compliant

• Patent Pending

• Fully Submersible

• Marketing within the light provides increased Brand Exposure to thousands of road users everyday. The only marketing that road users are forced to look at as brake and indicator lights are engaged.

• Clearest Light on the Market. Uses advanced, Innovative LED Technology never seen before to provide widespread seamless light.

• Advanced L.E.D Technology uses the L.E.D to project light at an angle that meets ADR standards rather than the conventional Trailer Light which relies on the patterns in the outer casing.

• Virtually Indestructible Clear Polycarbonate Lens.

 

KT Signature Lamps fitted to Nolan’s Interstate Transport Trucks. Model used: KT57332M Stop, Tail & Indicator Triple Truck Lamp. (Click to view full range of lights available)

KT SIGNATURE TRUCK & TRAILER LAMPS FEATURE SUPERIOR L.E.D TECHNOLOGY

The KT Trailer Lamp range was developed with the specific goal in mind of producing the very best performing trailer lamp available in the global market. It was determined that to do this, the output of the light had to be superior to any lamp currently available.

It was noted by the KT team that interior lighting for homes and buildings is very bright, smooth and soft. Yet for vehicle lighting, the light output is always oddly shaped, streaked with patterns and essentially not as effective as it could be.
This is generally because trailer lighting requires specific size housings which limits design techniques and the passing of ECE and ADR, further restricting what can be achieved.

Working within this framework, the strategy became about re-creating the light source itself, not the housing or the lens. The KT team then set about designing an all new Light emitting Diode, that, although all looking the same, can be changed internally to create different angles of light. This allowed us to step away from the use of lens optics and reflectors to direct the light.

The results in light output can be seen below, with the KT lamps delivering the most incredibly even light output. The performance gains of this technology ensures that the lamps pass ECE and ADR with ease, they are more noticeable from all angles on the road, making them safer. Another safety benefit is the use of clear lenses and housings, as the transition from clear to red or amber is so dramatic, the attention these lamps demand from road users is far greater than that of traditional lamps, further increasing road safety.

Comparison photos between Conventional L.E.D Technology & New KT Superior L.E.D Technology.

---

VIEW OUR RANGE OF LIGHTS AVAILABLE BY DOWNLOADING OUR CATALOGUE:
For any inquiries, contact us on 1300 559 953 or email sales@ktcables.com.au

 

OUTBACK KEV’S EXPERIENCE WITH KT HEAT SHRINK MINI SPOOLS

G’Day, Kev here,

I have been travelling around quite a bit lately and I like walking in and out of little automotive and hardware stores, picking up odds and ends that I might need on my next trip.

I just so happened to notice these KT Heat Shrink Spool Mini Spools in most of the stores I had been into so I had to see what all the fuss was about.  They were well priced so purchased 3 different sizes and thought I’d give them a run for their money.

I have never used heat shrink before, I always used to do it the old bush way and wack some duct tape over the exposed wiring connections, but now with the times changing, I don’t think that’s considered safe by most anymore. Anyway, it seems heat shrink is apparently what everyone uses these days for sealing exposed wiring connections etc.

Before I handed over my money, the bloke at the counter asked me if I had a gas torch to use with the heat shrink. I had no idea what he was talking about. I would have assumed you just use a cigarette lighter – shows how much times have changed. He showed me a demonstration on how to use the nifty little tool. What a fantastic little gadget! I had not realised how easy it was to use, and how small it was. I could throw it straight in my tool box.

 

First of all, I noticed how well packaged these Heat Shrink Mini Spools are. I could chuck them in the back of the truck and not have to worry about the dirt and dust getting into them. They also don’t unravel which is a bonus! Don’t you just get a bee in your bonnet when you have to waste time rolling something up because it has somehow unraveled itself?

So anyway, after purchasing a KT gas torch and my 3 Heat Shrink Mini spools, I was on my way out to this really great fishing spot. It’s a pretty rough track to get out there, and I would not recommend taking it if you were not experienced in four wheel driving. I passed many low hanging branches on my way out there but this one caught onto my spot lights on my roof and tore through some of the wiring – bugger!

 
That’s when I remembered I had bought some of that KT Heat Shrink! I got my trusty tool box out with my KT gas torch – here’s a tip – never go out bush without a tool box. It could save your life!

I stripped the broken wire ends back just enough to be able to twist them together again, cut some heat shrink to size and slid it over one side of the wires.  I then twisted the stripped wires together to form the connection again. I slid the heat shrink over the exposed wires, grabbed the KT gas torch and heated up the heat shrink, shrinking it down over the connection.  After a 5 minute repair job, It was good as new! I didn’t even have to worry about the rain getting to the wires as it was completely sealed.

So after my experience with my damaged wiring, I then researched into heat shrink and found out that KT sells heat shrink in many different forms including Lengths, Retail Mini Spools, Blister Packs, Heat Shrink Spool Mates, Heat Shrink End Caps and even in assorted kits. It is even available in a wide range of sizes and various colours! I also found that KT provides an adhesive heat shrink which gives even more protection as when the heat shrink is heated up using a gas torch, the internal adhesive melts onto the cable forming a secure connection.

It really is an amazing product and good quality at that! It was only meant to be a temporary fix for me, but so far it has lasted. What’s that saying again? ‘If it isn’t broken, don’t fix it?

’I would recommend KT heat shrink to anyone who has a vehicle or goes out bush, even just keep some in your vehicle. You never know when something as simple as a broken wire, could get you stuck in a rut.

---

For More Information on this product, please contact us on 1300 559 953 or Click Here to email us.

Learn more about KT’s Heat Shrink Range here: ‘KT Standard Wall, Dual Wall and Adhesive Heat Shrink’

Download our Heat Shrink Catalogue

KT Superior LED Licence Plate Lamp

ABOUT THE NEW L.E.D TECHNOLOGY

---

KT Truck and Trailer Lamps – SUPERIOR L.E.D Technology.

The KT Trailer Lamp range was developed with the specific goal in mind of producing the very best performing trailer lamp available in the global market. It was determined that to do this, the output of the light had to be superior to any lamp currently available.

It was noted by the KT team that interior lighting for homes and buildings is very bright, smooth and soft. Yet for vehicle
lighting, the light output is always oddly shaped, streaked with patterns and essentially not as effective as it could be.
This is generally because trailer lighting requires specific size housings which limits design techniques and the passing of ECE and ADR, further restricting what can be achieved.

Working within this framework, the strategy became about re-creating the light source itself, not the housing or the lens. The KT team then set about designing an all new Light emitting Diode, that, although all looking the same, can be changed internally to create different angles of light. This allowed us to step away from the use of lens optics and reflectors to direct the light.

The results in light output can be seen below, with the KT lamps delivering the most incredibly even light output. The performance gains of this technology ensures that the lamps pass ECE and ADR with ease, they are more noticeable from all angles on the road, making them safer. Another safety benefit is the use of clear lenses and housings, as the transition from clear to red or amber is so dramatic, the attention these lamps demand from road users is far greater than that of traditional lamps, further increasing road safety.

 

 

• ADR & ECE Compliant
• World Wide Patent Pending
• Fully Submersible
• Clearest Light on the Market
• Widespread Seamless Light
• Advanced L.E.D Technology uses the L.E.D to project light at an angle that meets ADR rather than the conventional Trailer Light which relies on the patterns in the outer casing
• Virtually Indestructible Clear Poly-carbonate Lens

---

THE KT SUPERIOR L.E.D LICENCE PLATE LAMP 

Model No. KT57150
Licence Plate Lamp

• 12V Only
• ADR & ECE Compliant (48/00)
• World Wide Patent Pending
• Waterproof and fully submersible
•  Virtually indestructible poly-carbonate lens
• Pre-wired with 150mm of 2 core cable
• Stainless steel nuts and bolts included
• Packed in a retail blister pack
• 5 Year Warranty

---

 

DOWNLOAD OUR TRUCK AND TRAILER LIGHT CATALOGUE HERE:

KT Superior L.E.D Truck and Trailer Light Catalogue

---

THE KT CLICK N TOW TRAILER LAMP WIRING HARNESS SYSTEM

The KT Click N Tow Trailer Light Wiring Harness System is a simple colour coded wiring system which is waterproof, universal and compatible with all brands of trailer lamps. The System is designed for a simple, easy Trailer Light Wiring Harness Installation. Simply Click ‘N’ Tow.The system is designed using 21 Part Number’s. Each Part Number’s packaging contains a Colour Code. This colour coding system is used in conjunction with the ‘KT Click ‘N’Tow Trailer Light Wiring Harness System Guide’. These guides are supplied inside each product packaging and is also provided on merchandiser signage.

The Guide assists in identifying the parts required, and also supports you with the installation of your Wiring Harness. To read more about the Click N Tow Trailer Light Wiring Harness System,
Visit our Click N Tow Blog Post Here

---

VIEW OUR FULL RANGE OF KT SUPERIOR L.E.D TRUCK & TRAILER LAMPS AVAILABLE:

(Click to View Product Range)

(Click to View Product Range)

(Click to View Product Range)

(Click to View Product Range)

(Click to View Product Range)

(Click to View Product Range)

(Click to View Product Range)

 

 

 

---

(Click to View Product Range)

---

KT Superior LED Mine Bar/Combination Lamps

ABOUT THE NEW L.E.D TECHNOLOGY

---

KT Truck and Trailer Lamps – SUPERIOR L.E.D Technology.

The KT Trailer Lamp range was developed with the specific goal in mind of producing the very best performing trailer lamp available in the global market. It was determined that to do this, the output of the light had to be superior to any lamp currently available.

It was noted by the KT team that interior lighting for homes and buildings is very bright, smooth and soft. Yet for vehicle
lighting, the light output is always oddly shaped, streaked with patterns and essentially not as effective as it could be.
This is generally because trailer lighting requires specific size housings which limits design techniques and the passing of ECE and ADR, further restricting what can be achieved.

Working within this framework, the strategy became about re-creating the light source itself, not the housing or the lens. The KT team then set about designing an all new Light emitting Diode, that, although all looking the same, can be changed internally to create different angles of light. This allowed us to step away from the use of lens optics and reflectors to direct the light.

The results in light output can be seen below, with the KT lamps delivering the most incredibly even light output. The performance gains of this technology ensures that the lamps pass ECE and ADR with ease, they are more noticeable from all angles on the road, making them safer. Another safety benefit is the use of clear lenses and housings, as the transition from clear to red or amber is so dramatic, the attention these lamps demand from road users is far greater than that of traditional lamps, further increasing road safety.

 

 

• ADR & ECE Compliant
• World Wide Patent Pending
• Fully Submersible
• Clearest Light on the Market
• Widespread Seamless Light
• Advanced L.E.D Technology uses the L.E.D to project light at an angle that meets ADR rather than the conventional Trailer Light which rely’s on the patterns in the outer casing
• Virtually Indestructible Clear Poly-carbonate Lens
• 5 Year Warranty

---

THE KT SUPERIOR L.E.D SIDE MARKER LAMP RANGE

Model No. KT57160
Stop, Tail and Indicator Lamp

Model No. KT57160
Stop, Tail and Indicator Lamp

 

 

• 12V only
• ADR & ECE Compliant (6/00 Cat 2a, 49/00)
• Waterproof and fully submersible
• Virtually indestructible poly-carbonate lens
• Pre-wired with 400mm of 4 core cable
• Stainless steel nuts and bolts included
• Packed in a retail blister pack
• 5 Year Warranty

---

Model No. KT57161M
Stop, Tail, Indicator and Reverse Lamp

Model No. KT57161M
Stop, Tail, Indicator and Reverse Lamp

• 12-32V
• ADR & ECE Compliant (1/00, 6/00 Cat 2a, 49/00)
• Waterproof and fully submersible
• Virtually indestructible poly-carbonate lens
• Pre-wired with 400mm of 5 core cable
• Stainless steel nuts and bolts included
• Packed in a retail blister pack
• 5 Year Warranty

---

DOWNLOAD OUR TRUCK AND TRAILER LIGHT CATALOGUE HERE:

KT Superior L.E.D Truck and Trailer Light Catalogue

---

THE KT CLICK N TOW TRAILER LIGHT HARNESS SYSTEM

The KT Click N Tow Trailer Light Wiring Harness System is a simple colour coded wiring system which is waterproof, universal and compatible with all brands of trailer lamps. The System is designed for a simple, easy Trailer Light Wiring Harness Installation. Simply Click ‘N’ Tow.The system is designed using 21 Part Numbers. Each Part Number’s packaging contains a Colour Code. This colour coding system is used in conjunction with the ‘KT Click ‘N’Tow Trailer Light Wiring Harness System Guide’. These guides are supplied inside each product packaging and is also provided on merchandiser signage.

The Guide assists in identifying the parts required, and also supports you with the installation of your Wiring Harness. To read more about the Click N Tow Trailer Light Wiring Harness System, Visit our Click N Tow Blog Post Here

---

VIEW OUR FULL RANGE OF KT SUPERIOR L.E.D TRUCK & TRAILER LAMPS AVAILABLE:

(Click to View Product Range)

(Click to View Product Range)

(Click to View Product Range)

(Click to View Product)

(Click to View Product Range)

(Click to View Product Range)

(Click to View Product Range)

 

 

 

---

(Click to View Product Range)

 

---

 

---

KT Superior LED Trailer Lamps

ABOUT THE NEW L.E.D TECHNOLOGY

---

KT Truck and Trailer Lamps – SUPERIOR L.E.D Technology.

The KT Trailer Lamp range was developed with the specific goal in mind of producing the very best performing trailer lamp available in the global market. It was determined that to do this, the output of the light had to be superior to any lamp currently available.

It was noted by the KT team that interior lighting for homes and buildings is very bright, smooth and soft. Yet for vehicle
lighting, the light output is always oddly shaped, streaked with patterns and essentially not as effective as it could be.
This is generally because trailer lighting requires specific size housings which limits design techniques and the passing of ECE and ADR, further restricting what can be achieved.

Working within this framework, the strategy became about re-creating the light source itself, not the housing or the lens. The KT team then set about designing an all new Light emitting Diode, that, although all looking the same, can be changed internally to create different angles of light. This allowed us to step away from the use of lens optics and reflectors to direct the light.

The results in light output can be seen below, with the KT lamps delivering the most incredibly even light output. The performance gains of this technology ensures that the lamps pass ECE and ADR with ease, they are more noticeable from all angles on the road, making them safer. Another safety benefit is the use of clear lenses and housings, as the transition from clear to red or amber is so dramatic, the attention these lamps demand from road users is far greater than that of traditional lamps, further increasing road safety.

 

 

• ADR & ECE Compliant
• World Wide Patent Pending
• Fully Submersible
• Clearest Light on the Market
• Widespread Seamless Light
• Advanced L.E.D Technology uses the L.E.D to project light at an angle that meets ADR rather than the conventional Trailer Light which relies on the patterns in the outer casing
• Virtually Indestructible Clear Poly-carbonate Lens
• 5 Year Warranty

---

THE KT SUPERIOR L.E.D SIDE MARKER LAMP RANGE Model No. KT57200P Stop, Tail and Indicator Lamp Kit Includes 2 lamps per blister pack

Model No. KT57200P
Stop, Tail and Indicator Lamp Kit Includes 2 lamps per blister pack

•  12V only
•  ADR & ECE Compliant (6/00 Cat 2a, 49/00)
• Waterproof and fully submersible
• Virtually indestructible poly-carbonate lens
• Pre-wired with 400mm of 4 core cable
• Stainless steel nuts and bolts included
• Packed in a retail blister pack
• 5 Year Warranty

---

Model No. KT57201P Stop, Tail, Indicator and Licence Plate Lamp Kit Includes 2 lamps per blister pack

Model No. KT57201P
Stop, Tail, Indicator and Licence Plate
Lamp Kit Includes 2 lamps per blister pack

• 12V only
• ADR & ECE Compliant (6/00 Cat 2a, 47/00,48/00, 49/00)
• Waterproof and fully submersible
• Virtually indestructible poly-carbonate lens
• Pre-wired with 400mm of 4 core cable
• Stainless steel nuts and bolts included
• Packed in a retail blister pack
• 5 Year Warranty

---

Model No. KT57250P Stop, Tail and Indicator Lamp Kit Includes 2 lamps per blister pack

Model No. KT57250P
Stop, Tail and Indicator Lamp Kit Includes 2 lamps per blister pack

• 12V only
• ADR & ECE Compliant (6/00 Cat 2a, 49/00)
• Waterproof and fully submersible
• Virtually indestructible poly-carbonate lens
• Pre-wired with 400mm of 4 core cable
• Stainless steel nuts and bolts included
• Packed in a retail blister pack
• 5 Year Warranty

---

Model No. KT57251P Stop, Tail, Indicator and Licence Plate Lamp Kit Includes 2 lamps per blister pack

Model No. KT57251P
Stop, Tail, Indicator and Licence Plate
Lamp Kit Includes 2 lamps per blister pack

• 12V only
• ADR & ECE Compliant (6/00 Cat 2a, 47/00,48/00, 49/00)
• Waterproof and fully submersible
• Virtually indestructible poly-carbonate lens
• Pre-wired with 400mm of 4 core cable
• Stainless steel nuts and bolts included
• Packed in a retail blister pack
• 5 Year Warranty

---

DOWNLOAD OUR TRUCK AND TRAILER LIGHT CATALOGUE HERE:

KT Superior L.E.D Truck and Trailer Light Catalogue

---

THE KT CLICK N TOW TRAILER LIGHT HARNESS SYSTEM

The KT Click N Tow Trailer Light Wiring Harness System is a simple colour coded wiring system which is waterproof, universal and compatible with all brands of trailer lamps. The System is designed for a simple, easy Trailer Light Wiring Harness Installation. Simply Click ‘N’ Tow.The system is designed using 21 Part Numbers. Each Part Number’s packaging contains a Colour Code. This colour coding system is used in conjunction with the ‘KT Click ‘N’Tow Trailer Light Wiring Harness System Guide’. These guides are supplied inside each product packaging and is also provided on merchandiser signage. The Guide assists in identifying the parts required, and also supports you with the installation of your Wiring Harness. To read more about the Click N Tow Trailer Light Wiring Harness System, Visit our Click N Tow Blog Post Here

---

VIEW OUR FULL RANGE OF KT SUPERIOR L.E.D TRUCK & TRAILER LAMPS AVAILABLE:

(Click to View Product Range)

(Click to View Product Range)

(Click to View Product)

(Click to View Product Range)

(Click to View Product Range)

---

 

---