ABOUT THE NEW L.E.D TECHNOLOGY
KT Truck and Trailer Lamps – SUPERIOR L.E.D Technology. 
The KT Trailer Lamp range was developed with the specific goal in mind of producing the very best performing trailer lamp available in the global market. It was determined that to do this, the output of the light had to be superior to any lamp currently available.
It was noted by the KT team that interior lighting for homes and buildings is very bright, smooth and soft. Yet for vehicle
lighting, the light output is always oddly shaped, streaked with patterns and essentially not as effective as it could be.
This is generally because trailer lighting requires specific size housings which limits design techniques and the passing of ECE and ADR, further restricting what can be achieved.
Working within this framework, the strategy became about re-creating the light source itself, not the housing or the lens. The KT team then set about designing an all new Light emitting Diode, that, although all looking the same, can be changed internally to create different angles of light. This allowed us to step away from the use of lens optics and reflectors to direct the light.
The results in light output can be seen below, with the KT lamps delivering the most incredibly even light output. The performance gains of this technology ensures that the lamps pass ECE and ADR with ease, they are more noticeable from all angles on the road, making them safer. Another safety benefit is the use of clear lenses and housings, as the transition from clear to red or amber is so dramatic, the attention these lamps demand from road users is far greater than that of traditional lamps, further increasing road safety.
- ADR & ECE Compliant
- World Wide Patent Pending
- Fully Submersible
- Clearest Light on the Market
- Widespread Seamless Light
- Advanced L.E.D Technology uses the L.E.D to project light at an angle that meets ADR rather than the conventional Trailer Light which relies on the patterns in the outer casing
- Virtually Indestructible Clear Poly-carbonate Lens
- 5 Year Warranty
THE KT SUPERIOR L.E.D SIDE MARKER LAMP RANGE Model No. KT57200P Stop, Tail and Indicator Lamp Kit Includes 2 lamps per blister pack
Stop, Tail and Indicator Lamp Kit Includes 2 lamps per blister pack
- 12V only
- ADR & ECE Compliant (6/00 Cat 2a, 49/00)
- Waterproof and fully submersible
- Virtually indestructible poly-carbonate lens
- Pre-wired with 400mm of 4 core cable
- Stainless steel nuts and bolts included
- Packed in a retail blister pack
- 5 Year Warranty
Model No. KT57201P Stop, Tail, Indicator and Licence Plate Lamp Kit Includes 2 lamps per blister pack
Stop, Tail, Indicator and Licence Plate
Lamp Kit Includes 2 lamps per blister pack
- 12V only
- ADR & ECE Compliant (6/00 Cat 2a, 47/00,48/00, 49/00)
- Waterproof and fully submersible
- Virtually indestructible poly-carbonate lens
- Pre-wired with 400mm of 4 core cable
- Stainless steel nuts and bolts included
- Packed in a retail blister pack
- 5 Year Warranty
Model No. KT57250P Stop, Tail and Indicator Lamp Kit Includes 2 lamps per blister pack
Stop, Tail and Indicator Lamp Kit Includes 2 lamps per blister pack
- 12V only
- ADR & ECE Compliant (6/00 Cat 2a, 49/00)
- Waterproof and fully submersible
- Virtually indestructible poly-carbonate lens
- Pre-wired with 400mm of 4 core cable
- Stainless steel nuts and bolts included
- Packed in a retail blister pack
- 5 Year Warranty
Model No. KT57251P Stop, Tail, Indicator and Licence Plate Lamp Kit Includes 2 lamps per blister pack
Stop, Tail, Indicator and Licence Plate
Lamp Kit Includes 2 lamps per blister pack
- 12V only
- ADR & ECE Compliant (6/00 Cat 2a, 47/00,48/00, 49/00)
- Waterproof and fully submersible
- Virtually indestructible poly-carbonate lens
- Pre-wired with 400mm of 4 core cable
- Stainless steel nuts and bolts included
- Packed in a retail blister pack
- 5 Year Warranty
DOWNLOAD OUR TRUCK AND TRAILER LIGHT CATALOGUE HERE:
THE KT CLICK N TOW TRAILER LIGHT HARNESS SYSTEM
The KT Click N Tow Trailer Light Wiring Harness System is a simple colour coded wiring system which is waterproof, universal and compatible with all brands of trailer lamps. The System is designed for a simple, easy Trailer Light Wiring Harness Installation. Simply Click ‘N’ Tow.The system is designed using 21 Part Numbers. Each Part Number’s packaging contains a Colour Code. This colour coding system is used in conjunction with the ‘KT Click ‘N’Tow Trailer Light Wiring Harness System Guide’. These guides are supplied inside each product packaging and is also provided on merchandiser signage. The Guide assists in identifying the parts required, and also supports you with the installation of your Wiring Harness. To read more about the Click N Tow Trailer Light Wiring Harness System, Visit our Click N Tow Blog Post Here
VIEW OUR FULL RANGE OF KT SUPERIOR L.E.D TRUCK & TRAILER LAMPS AVAILABLE:
KT Blog 