KT Truck and Trailer Lamps – SUPERIOR L.E.D Technology.
The KT Trailer Lamp range was developed with the specific goal in mind of producing the very best performing trailer lamp available in the global market. It was determined that to do this, the output of the light had to be superior to any lamp currently available.
It was noted by the KT team that interior lighting for homes and buildings is very bright, smooth and soft. Yet for vehicle
lighting, the light output is always oddly shaped, streaked with patterns and essentially not as effective as it could be.
This is generally because trailer lighting requires specific size housings which limits design techniques and the passing of ECE and ADR, further restricting what can be achieved.
Working within this framework, the strategy became about re-creating the light source itself, not the housing or the lens. The KT team then set about designing an all new Light emitting Diode, that, although all looking the same, can be changed internally to create different angles of light. This allowed us to step away from the use of lens optics and reflectors to direct the light.
The results in light output can be seen below, with the KT lamps delivering the most incredibly even light output. The performance gains of this technology ensures that the lamps pass ECE and ADR with ease, they are more noticeable from all angles on the road, making them safer. Another safety benefit is the use of clear lenses and housings, as the transition from clear to red or amber is so dramatic, the attention these lamps demand from road users is far greater than that of traditional lamps, further increasing road safety.
ADR & ECE Compliant
World Wide Patent Pending
Fully Submersible
Clearest Light on the Market
Widespread Seamless Light
Advanced L.E.D Technology uses the L.E.D to project light at an angle that meets ADR rather than the conventional Trailer Light which relies on the patterns in the outer casing
DOWNLOAD OUR TRUCK AND TRAILER LIGHT CATALOGUE HERE:
THE KT CLICK N TOW TRAILER LIGHT HARNESS SYSTEM
The KT Click N Tow Trailer Light Wiring Harness System is a simple colour coded wiring system which is waterproof, universal and compatible with all brands of trailer lamps. The System is designed for a simple, easy Trailer Light Wiring Harness Installation. Simply Click ‘N’ Tow.The system is designed using 21 Part Numbers. Each Part Number’s packaging contains a Colour Code. This colour coding system is used in conjunction with the ‘KT Click ‘N’Tow Trailer Light Wiring Harness System Guide’. These guides are supplied inside each product packaging and is also provided on merchandiser signage. The Guide assists in identifying the parts required, and also supports you with the installation of your Wiring Harness. To read more about the Click N Tow Trailer Light Wiring Harness System, Visit our Click N Tow Blog Post Here
VIEW OUR FULL RANGE OF KT SUPERIOR L.E.D TRUCK & TRAILER LAMPS AVAILABLE:
Trailer Adaptors may be used to easily mate trailers and vehicles with different end Plugs or Sockets. This prevents the need to re-install another Plug or Socket to Match. For Example: If you are running a 7 Pin Flat Trailer Socket from your Vehicle and a Small Round Trailer Plug on your Trailer, you would require a 7 Pin Flat Trailer Plug to a 7 Pin Small Round Trailer Socket Adaptor to complete your connection.
Using a Trailer Adaptor entails many benefits. Not only does it prevent the user having to re-install a trailer Plug or Socket to match (if they have a miss-matching Plug on the Car to what is installed on the Trailer), but also provides extra length between the Car and Trailer connections, making it popular in the caravan and 4WD markets.
The innovative ideas from KT continue in the release of the first ever Car Coil Adaptor. In the past, problems of cable strain on towed vehicles can pull out the Adaptor and similarly should the lead be to long then the cable can drag . The KT Car Coil Adaptor features a 1 meter of coiled cable allowing flexibility and prevents Adaptors being pulled out of sockets.
About the In-Built LED Circuit Tester:
The Inbuilt circuit tester was introduced to the Trailer Plugs, Sockets and Adaptors to ensure a ‘Safer Towing’ environment and spread awareness of trailer light circuit failures for all road users by providing products suitable for a wide range of markets.
Incorporating the LED Trailer Plug which features an in-built LED Circuit Tester was a great KT innovation. The In-built LED Circuit Tester enables the user to check that there is power to each wiring circuit and detects any wiring faults, loose connections and corroded pins caused by general ‘wear and tear’. The LED Trailer Plug features 6 LED’s. When the Plug is switched ‘On’ these LED’s illuminate to indicate a secure power connection. If any of the LED’s are not illuminated, this indicates a faulty connection.
How to use the In-Built Circuit Tester on any KT LED Adaptor:
Connect the adaptor to the vehicle socket and the trailer plug. The inbuilt tester will check that the electrical circuit for the Indicators, Park Lights, Brake Lights, Service Brakes and Auxiliary by pressing down the switch. Providing that the tested circuit has power from the application then an LED light will illuminate to verify that power is passing through the connector.
If any LED’s fail to illuminate the tester will assist in determining where the fault is located. If no LED’s illuminate then check the earth connections at the vehicle trailer socket. Generally this is a white wire.Should any LED’s in indicators, park or brake fail to operate then check the relevant connection at the trailer socket on the vehicle.Should a different LED illuminate to the circuit being tested then there will be a cross wired connection at the trailer socket. This can be corrected by fitting the trailer cable to the correct terminal connection in the socket.
Should your vehicle not be wired for auxiliary or service brakes then the 2 relevant LED’s will not illuminate as there will be no power. To turn off the tester simply press button.
The KT LED Trailer Coil Adapter will not detect broken or damaged cable from the plug to the application nor will it detect faulty globes or LED lights.
KT provides of Trailer Adaptors suitable for use on Standard passenger vehicles, Four Wheel Drives, Caravans, Trucks and Trailers and more. These include:
Standard (Non-LED) Trailer Adaptors
LED Trailer Adaptors (including an in-built LED circuit tester)
LED Car Coil Adaptors (featuring a 1M Flexible Coil to extend the length and provides flexibility between the vehicle and trailer connections)
LED Car Coil Extensions (allows the user to have a Socket on both Vehicle and Trailer, while having a flexibility and length between connections)
LED Car Coil Extension Leads (featuring a 1M Flexible Coil to extend the length and provides flexibility between the vehicle and trailer connections)
The KT Standard Adaptor Range includes 6 Adaptors to suit all vehicle types. KT Standard Adaptors are durable and provide flexibility between vehicle and trailer connections. A conduit between the Plug and the Socket of the Adaptor protects internal wiring from harsh weather conditions and possible damage.
This range includes:
KT750 – Suits: 7 Pin Small Round Socket to 7 Pin Flat Plug
KT751 – Suits: 7 Pin Flat Socket to 7 Pin Small Plug
KT752 – Suits: 7 Pin Large Round Socket to 7 Pin Flat Plug
KT753 – Suits: 7 Pin Flat Socket to 7 Pin Large Round Plug
KT754 – Suits: 7 Pin Large Round Socket – 7 Pin Small Round Plug
KT755 – Suits: 7 Pin Small Round Socket – 7 Pin Large Round Plug
KT LED Trailer Adaptors provide 2 different connections for the users who have 2 different connections. (Eg: A 7 Pin Small Round Socket on their vehicle and a 7 Pin Flat Plug on their Trailer).
The In-Built LED Circuit Tester allows the user to test the circuits in their trailer to diagnose any faulty connections. This helps determine if the fault is located in the vehicle or the trailer. The LED’s will not illuminate if there is no power to the trailer from the vehicle.
This range includes:
KT760 – Suits: 7 Pin Small Round Socket to 7 Pin Flat Plug
KT761 – Suits: 7 Pin Flat Socket to 7 Pin Small Plug
KT762 – Suits: 7 Pin Large Round Socket to 7 Pin Flat Plug
KT763 – Suits: 7 Pin Flat Socket to 7 Pin Large Round Plug
KT764 – Suits: 7 Pin Large Round Socket – 7 Pin Small Round Plug
KT765 – Suits: 7 Pin Small Round Socket – 7 Pin Large Round Plug
View Video of KT LED Adaptors Range / In-built LED Circuit Tester Demonstration:
This range was initially developed in mind of the 4×4 and caravaning markets. The coil stretching up to 1M in length, provides flexibility when towing around sharp corners or high speed humps, eliminating plug pull-out and dragging. The Car Coil Adaptor is the first of it’s kind and very popular in the 4×4 market. This range includes 6 Adaptors to suit a variety of connections.
This range includes:
KT770 – Suits: 7 Pin Small Round Socket to 7 Pin Flat Plug
KT771 – Suits: 7 Pin Flat Socket to 7 Pin Small Plug
KT772 – Suits: 7 Pin Large Round Socket to 7 Pin Flat Plug
KT773 – Suits: 7 Pin Flat Socket to 7 Pin Large Round Plug
KT774 – Suits: 7 Pin Large Round Socket – 7 Pin Small Round Plug
KT775 – Suits: 7 Pin Small Round Socket – 7 Pin Large Round Plug
View Video Demonstration of KT Car Coil Adaptor Stretching to 1M in Length:
The LED Car Coil Extensions Range came about after extensive marketing research. It was discovered that many Trailer owners preferred to have a Trailer Socket on their Vehicle and a Trailer Socket on their Trailer at all times. The idea of this was that the Trailer Socket contains a spring-loaded dust-proof cover and by leaving this on the Vehicle and Trailer, the pins would always be protected from dirt and dust entering the socket and always protected from harsh weather conditions.
This range includes:
KT776 – Suits: 7 Pin Small Round Socket to 7 Pin Small Round Socket – LED with 1M Flexible Coil (Adaptor is a: 7 Pin Small Round Plug to 7 Pin Small Round Plug)
KT777 – Suits: 7 Pin Flat Socket to 7 Pin Flat Socket – LED with 1M Flexible Coil (Adaptor is a: 7 Pin Flat Plug to 7 Pin Flat Plug)
KT778 – Suits: 7 Pin Large Round Socket to 7 Pin Large Round Socket – LED with 1M Flexible Coil (Adaptor is a: 7 Pin Large Round Plug to 7 Pin Large Round Plug)
The Car Coil Extension & Extension Leads Range was shortly released after the similar LED Car Coil Adaptors Range. This particular range is designed to ‘extend’ the connection that already exists.
Some users prefer the extension as they can leave a socket connection on their vehicle and trailer at all times. (All KT Sockets contain a spring loaded retracting cover, preventing dirt and dust entering connections).
This range includes:
KT776E – 7 Pin Small Round Socket to 7 Pin Small Round Plug – LED with 1M Flexible Coil
KT777E – 7 Pin Flat Socket to 7 Pin Flat Plug – LED with 1M Flexible Coil
KT778E – 7 Pin Large Round Socket to 7 Pin Large Round Plug – LED with 1M Flexible Coil